2010 Neighborhood Tabulation Areas (NTAs) are medium-sized statistical geographies for reporting Decennial Census and American Community Survey (ACS). 2010 NTAs are created by aggregating 2020 census tracts and nest within Community District Tabulation Areas (CDTA). NTAs were delineated with the need for both geographic specificity and statistical reliability in mind. Consequently, each NTA contains enough population to mitigate sampling error associated with the ACS yet offers a unit of analysis that is smaller than a Community District.

Though NTA boundaries and their associated names roughly correspond with many neighborhoods commonly recognized by New Yorkers, NTAs are not intended to definitively represent neighborhoods, nor are they intended to be exhaustive of all possible names and understandings of neighborhoods throughout New York City. Additionally, non-residential areas including large parks, airports, cemeteries, and other special areas are represented separately within this dataset and are assigned codes according to their type (See NTAType field).

All previously released versions of this data are available at BYTES of the BIG APPLE- Archive

Table of ACS Demographics and
profile represented at the NTA level.
NTAs are aggregations of census tracts
that are subsets of New York City's 55
Public Use Microdata Areas (PUMAs)

Population Numbers By New York City Neighborhood Tabulation Areas

The data was collected from Census Bureaus' Decennial data dissemination (SF1).
Neighborhood Tabulation Areas (NTAs), are aggregations of census tracts that are subsets of New York City's 55 Public Use Microdata Areas (PUMAs). Primarily due to these constraints, NTA boundaries and their associated names may not definitively represent neighborhoods.
This report shows change in population from 2000 to 2010 for each NTA.
Compiled by the Population Division – New York City Department of City Planning.

This dataset contains the estimated number of cumulative health events avoided per neighborhood tabulation area (NTA) resident due to reductions in fine particulates or particulate matter less than 2.5 micrometers in diameter (PM2.5). The Mayor’s Office of Management and Budget (OMB) obtained the health events avoided value through collaboration with the New York City (NYC) Health Department. The reductions in PM2.5 are the same reductions found in the "Forecasted Emissions and PM2.5 Reductions from City Actions" dataset. This dataset uses the same data included in the "Forecasted Avoided Health Events", the main difference is that this dataset is mapped geographically. For any additional detail about PM2.5, refer to the "Impact of Fossil Fuel Use on Air Quality and Health" sub-section of the FY25 New York City Climate Budgeting publication (https://www.nyc.gov/assets/omb/downloads/pdf/exec24-nyccb.pdf).

You can find the complete collection of Climate Budget data by clicking here.

2020 Neighborhood Tabulation Areas (NTAs) are medium-sized statistical geographies for reporting Decennial Census and American Community Survey (ACS). 2020 NTAs are created by aggregating 2020 census tracts and nest within Community District Tabulation Areas (CDTA). NTAs were delineated with the need for both geographic specificity and statistical reliability in mind. Consequently, each NTA contains enough population to mitigate sampling error associated with the ACS yet offers a unit of analysis that is smaller than a Community District.

Though NTA boundaries and their associated names roughly correspond with many neighborhoods commonly recognized by New Yorkers, NTAs are not intended to definitively represent neighborhoods, nor are they intended to be exhaustive of all possible names and understandings of neighborhoods throughout New York City. Additionally, non-residential areas including large parks, airports, cemeteries, and other special areas are represented separately within this dataset and are assigned codes according to their type (See NTAType field). All previously released versions of this data are available at BYTES of the BIG APPLE- Archive.

2020 Neighborhood Tabulation Areas (NTAs) are medium-sized statistical geographies for reporting Decennial Census and American Community Survey (ACS). 2020 NTAs are created by aggregating 2020 census tracts and nest within Community District Tabulation Areas (CDTA). NTAs were delineated with the need for both geographic specificity and statistical reliability in mind. Consequently, each NTA contains enough population to mitigate sampling error associated with the ACS yet offers a unit of analysis that is smaller than a Community District.

Though NTA boundaries and their associated names roughly correspond with many neighborhoods commonly recognized by New Yorkers, NTAs are not intended to definitively represent neighborhoods, nor are they intended to be exhaustive of all possible names and understandings of neighborhoods throughout New York City. Additionally, non-residential areas including large parks, airports, cemeteries, and other special areas are represented separately within this dataset and are assigned codes according to their type (See NTAType field). All previously released versions of this data are available at BYTES of the BIG APPLE- Archive.

Net change in housing units arising from new buildings, demolitions, or alterations for NYC Census Blocks since 2010. The NYC Department of City Planning's (DCP) Housing Database provide the 2010 census count of housing units, the net change in Class A housing units since the census, and the count of units pending completion for commonly used political and statistical boundaries. These tables are aggregated from the DCP Housing Database, which is derived from Department of Buildings (DOB)-approved housing construction and demolition jobs filed or completed in NYC since January 1, 2010. Net housing unit change is calculated as the sum of all three construction job types that add or remove residential units: new buildings, major alterations, and demolitions, and can be used to determine the change in legal housing units across time and space.
All previously released versions of this data are available at BYTES of the BIG APPLE - Archive.

Net change in housing units arising from new buildings, demolitions, or alterations for NYC NTAs since 2010. The NYC Department of City Planning's (DCP) Housing Database provide the 2010 census count of housing units, the net change in Class A housing units since the census, and the count of units pending completion for commonly used political and statistical boundaries. These tables are aggregated from the DCP Housing Database, which is derived from Department of Buildings (DOB)-approved housing construction and demolition jobs filed or completed in NYC since January 1, 2010. Net housing unit change is calculated as the sum of all three construction job types that add or remove residential units: new buildings, major alterations, and demolitions, and can be used to determine the change in legal housing units across time and space.
All previously released versions of this data are available at BYTES of the BIG APPLE - Archive.

Net change in housing units arising from new buildings, demolitions, or alterations for NYC Census Blocks since 2010. The NYC Department of City Planning’s (DCP) Housing Database provide the 2010 census count of housing units, the net change in Class A housing units since the census, and the count of units pending completion for commonly used political and statistical boundaries. These tables are aggregated from the DCP Housing Database, which is derived from Department of Buildings (DOB)-approved housing construction and demolition jobs filed or completed in NYC since January 1, 2010. Net housing unit change is calculated as the sum of all three construction job types that add or remove residential units: new buildings, major alterations, and demolitions, and can be used to determine the change in legal housing units across time and space.

All previously released versions of this data are available at a BYTES of the BIG APPLE- Archive

Net change in housing units arising from new buildings, demolitions, or alterations for NYC Community Districts since 2010. The NYC Department of City Planning's (DCP) Housing Database provide the 2010 census count of housing units, the net change in Class A housing units since the census, and the count of units pending completion for commonly used political and statistical boundaries. These tables are aggregated from the DCP Housing Database, which is derived from Department of Buildings (DOB)-approved housing construction and demolition jobs filed or completed in NYC since January 1, 2010. Net housing unit change is calculated as the sum of all three construction job types that add or remove residential units: new buildings, major alterations, and demolitions, and can be used to determine the change in legal housing units across time and space.
All previously released versions of this data are available at BYTES of the BIG APPLE - Archive.

Net change in housing units arising from new buildings, demolitions, or alterations for NYC City Council Districts since 2010. The NYC Department of City Planning's (DCP) Housing Database provide the 2010 census count of housing units, the net change in Class A housing units since the census, and the count of units pending completion for commonly used political and statistical boundaries. These tables are aggregated from the DCP Housing Database, which is derived from Department of Buildings (DOB)-approved housing construction and demolition jobs filed or completed in NYC since January 1, 2010. Net housing unit change is calculated as the sum of all three construction job types that add or remove residential units: new buildings, major alterations, and demolitions, and can be used to determine the change in legal housing units across time and space.
All previously released versions of this data are available at BYTES of the BIG APPLE - Archive.

Net change in housing units arising from new buildings, demolitions, or alterations for NYC Census Tracts since 2010. The NYC Department of City Planning’s (DCP) Housing Database provide the 2010 census count of housing units, the net change in Class A housing units since the census, and the count of units pending completion for commonly used political and statistical boundaries. These tables are aggregated from the DCP Housing Database, which is derived from Department of Buildings (DOB)-approved housing construction and demolition jobs filed or completed in NYC since January 1, 2010. Net housing unit change is calculated as the sum of all three construction job types that add or remove residential units: new buildings, major alterations, and demolitions, and can be used to determine the change in legal housing units across time and space.

All previously released versions of this data are available at a BYTES of the BIG APPLE- Archive

Net change in housing units arising from new buildings, demolitions, or alterations for NYC Census Tracts since 2010. The NYC Department of City Planning's (DCP) Housing Database provide the 2010 census count of housing units, the net change in Class A housing units since the census, and the count of units pending completion for commonly used political and statistical boundaries. These tables are aggregated from the DCP Housing Database, which is derived from Department of Buildings (DOB)-approved housing construction and demolition jobs filed or completed in NYC since January 1, 2010. Net housing unit change is calculated as the sum of all three construction job types that add or remove residential units: new buildings, major alterations, and demolitions, and can be used to determine the change in legal housing units across time and space.
All previously released versions of this data are available at BYTES of the BIG APPLE - Archive.

Net change in housing units arising from new buildings, demolitions, or alterations for NYC Community Districts since 2010. The NYC Department of City Planning’s (DCP) Housing Database provide the 2010 census count of housing units, the net change in Class A housing units since the census, and the count of units pending completion for commonly used political and statistical boundaries. These tables are aggregated from the DCP Housing Database, which is derived from Department of Buildings (DOB)-approved housing construction and demolition jobs filed or completed in NYC since January 1, 2010. Net housing unit change is calculated as the sum of all three construction job types that add or remove residential units: new buildings, major alterations, and demolitions, and can be used to determine the change in legal housing units across time and space.

All previously released versions of this data are available at a BYTES of the BIG APPLE- Archive

The NYC Department of City Planning's (DCP) Housing Database contains all NYC Department of Buildings (DOB) approved housing construction and demolition jobs filed or completed in NYC since January 1, 2010. It includes the three primary construction job types that add or remove residential units: new buildings, major alterations, and demolitions, and can be used to determine the change in legal housing units across time and space. Records in the Housing Database Project-Level Files are geocoded to the greatest level of precision possible, subject to numerous quality assurance and control checks, recoded for usability, and joined to other housing data sources relevant to city planners and analysts.
Data are updated semiannually, at the end of the second and fourth quarters of each year.
Please see DCP's annual Housing Production Snapshot summarizing findings from the 21Q4 data release here. Additional Housing and Economic analyses are also available.
All previously released versions of this data are available at BYTES of the BIG APPLE - Archive.

Net change in housing units arising from new buildings, demolitions, or alterations for NYC City Council Districts since 2010. The NYC Department of City Planning’s (DCP) Housing Database provide the 2010 census count of housing units, the net change in Class A housing units since the census, and the count of units pending completion for commonly used political and statistical boundaries. These tables are aggregated from the DCP Housing Database, which is derived from Department of Buildings (DOB)-approved housing construction and demolition jobs filed or completed in NYC since January 1, 2010. Net housing unit change is calculated as the sum of all three construction job types that add or remove residential units: new buildings, major alterations, and demolitions, and can be used to determine the change in legal housing units across time and space.

All previously released versions of this data are available at a BYTES of the BIG APPLE- Archive

Net change in housing units arising from new buildings, demolitions, or alterations for NYC Community District Tabulation Areas (CDTAs) since 2010. The NYC Department of City Planning's (DCP) Housing Database provide the 2010 census count of housing units, the net change in Class A housing units since the census, and the count of units pending completion for commonly used political and statistical boundaries. These tables are aggregated from the DCP Housing Database, which is derived from Department of Buildings (DOB)-approved housing construction and demolition jobs filed or completed in NYC since January 1, 2010. Net housing unit change is calculated as the sum of all three construction job types that add or remove residential units: new buildings, major alterations, and demolitions, and can be used to determine the change in legal housing units across time and space.

All previously released versions of this data are available at BYTES of the BIG APPLE - Archive.

Key indicators of broadband adoption, service and infrastructure in New York City by NTA.