PLEASE DOWNLOAD THE FULL REPORT UNDER THE ATTACHMENT SECTION IN THE 'ABOUT THIS DATASET' SECTION BELOW.

This aggregated and anonymized dataset of single-family residential building asset attributes and observed average annual energy consumption over the 2-year period from August 2017 through July 2019 is available for Monroe County. The dataset includes more than 55,000 properties from the study’s matched residential dataset that had sufficient data for calculation of average annual energy consumption and could not be uniquely identified in the larger dataset of Monroe County residential parcels or Infogroup data. The data were anonymized by removing all property identifying information including address, parcel identifiers, and parcel size. Attributes such as square footage, building age, and assessed value were then grouped such that no groupings contained fewer than three properties in the Monroe County parcel dataset. This dataset with average annual energy consumption for gas, electric, and total consumption can be used by those interested in further analysis and energy modeling.

In response to the New York State Department of Public Service (DPS) Order Adopting Accelerated Energy Efficiency targets, issued December, 18, 2018, the New York State Energy Research and Development Authority (NYSERDA) contracted with Stone Environmental, Inc to conduct an Asset Data Matching Pilot in Monroe County to analyze building asset data, utility usage data, and NYSERDA program data for single family residential buildings. The objective of the study was to analyze publicly available data along with two years of utility usage data provided by Rochester Gas and Electric (RG&E) to provide information and data to the market to help reduce customer acquisition costs for adoption of energy efficiency measures and to better understand the ability to use building asset data to determine energy efficiency.

See the final report from the analysis under the attachments section.

NYSERDA offers objective information and analysis, innovative programs, technical expertise, and support to help New Yorkers increase energy efficiency, save money, use renewable energy, and accelerate economic growth. reduce reliance on fossil fuels. To learn more about NYSERDA’s programs, visit nyserda.ny.gov or follow us on X, Facebook, YouTube, or Instagram.

The Clean Energy Fund (CEF) Agriculture Audit program identifies energy efficiency measures for eligible farms and on-farm producers, including but not limited to: dairies, orchards, greenhouses, vegetables, vineyards, grain dryers, and poultry/egg. NYSERDA assigns Flexible Technical Assistance (FlexTech) Program Consultants to perform energy audits for eligible farms. Participating farms receive a customized plan with recommended energy efficiency upgrades. The Clean Energy Fund (CEF) Agriculture Audits dataset contains information collected from the audits such as location, electric and natural gas utility provider, and amount of CEF funding awarded to each audit.

The New York State Energy Research and Development Authority (NYSERDA) offers objective information and analysis, innovative programs, technical expertise, and support to help New Yorkers increase energy efficiency, save money, use renewable energy, accelerate economic growth, and reduce reliance on fossil fuels. To learn more about NYSERDA’s programs, visit nyserda.ny.gov or follow us on X, Facebook, YouTube, or Instagram.

How does your organization use this dataset? What other NYSERDA or energy-related datasets would you like to see on Open NY? Let us know by emailing OpenNY@nyserda.ny.gov.

This is part 2 of 2 (containing: Purchasing Decisions; Washer and Dryer; and Miscellaneous); part 1 (https://data.ny.gov/d/e58s-chjh) contains: Property Characteristics; Heating and Cooling; Water Heating; Tenant Appliances; Lighting; and Common Area. The New York State Energy Research and Development Authority (NYSERDA), in collaboration with the New York State Department of Public Service (DPS), conducted a statewide residential baseline study (study) from 2011 to 2014 of the single-family and multifamily residential housing segments, including new construction, and a broad range of energy uses and efficiency measures. This dataset includes data from 219 completed Multifamily owner and manager surveys. The types of data collected during the survey cover property characteristics, heating and cooling equipment, water heating equipment, tenant appliances, lighting, purchasing decision, common areas, clothes washing and drying, and miscellaneous equipment. The data is segmented to cover both common space equipment and, to the degree possible, tenant-unit equipment, such as refrigerators or clothes washers that are included in the rental by the building ownership.

The Building Energy Data Exchange Specification (BEDES, pronounced "beads" or /bi:ds/) is a dictionary of terms, definitions, and field formats that was created to help address a lack of standardization in terminology and vernacular for quantities. It is a dictionary upon which interoperable schema, databases and software tools can be built. The Department of Energy has begun using BEDES in its publicly available building energy-efficiency tools and can be used by private-sector software tools and databases.

This dataset is an inventory of NYSERDA Open NY datasets and data labels that have been mapped to a corresponding BEDES term.

For more information regarding BEDES data, please visit: https://www.energy.gov/eere/buildings/building-energy-data-exchange-specification-bedes

The New York State Energy Research and Development Authority (NYSERDA) offers objective information and analysis, innovative programs, technical expertise, and support to help New Yorkers increase energy efficiency, save money, use renewable energy, accelerate economic growth, and reduce reliance on fossil fuels. To learn more about NYSERDA’s programs, visit nyserda.ny.gov or follow us on X, Facebook, YouTube, or Instagram.

This dataset contains annual production information of oil and gas wells in New York State from 2001 to present.

How does your organization use this dataset? What other NYSERDA or energy-related datasets would you like to see on Open NY? Let us know by emailing OpenNY@nyserda.ny.gov.

The New York State Energy Research and Development Authority (NYSERDA), in collaboration with the New York State Department of Public Service (DPS), conducted a statewide residential baseline study (study) from 2011 to 2014 of the single-family and multifamily residential housing segments, including new construction, and a broad range of energy uses and efficiency measures. This dataset includes 2,982 single-family and 379 multifamily occupant survey completes for a total of 3,361 responses. The survey involved 2,285 Web, 1,041 telephone, and 35 mini-inspection surveys. The survey collected information on the following building characteristics: building shell, kitchen appliances, heating and cooling equipment, water heating equipment, clothes washing and drying equipment, lighting, pool and spa equipment, small household appliances, miscellaneous energy consuming equipment, as well as behaviors and characteristics of respondents.

This dataset provides the year, county, amount, grant category, general location, and project name of Hudson River Estuary Grants. This program is managed by the New York State Department of Environmental Conservation (DEC). It began in 1987 and focuses on the tidalHudson and its adjacent watershed

How does your organization use this dataset? What other NYSERDA or energy-related datasets would you like to see on Open NY? Let us know by emailing OpenNY@nyserda.ny.gov.

This is part 1 (containing: Property Characteristics; Heating and Cooling; Water Heating; Tenant Appliances; Lighting; and Common Areas) of 2; part 2 (https://data.ny.gov/d/hc4z-b2p5) contains: Purchasing Decisions; Washer and Dryer; and Miscellaneous. The New York State Energy Research and Development Authority (NYSERDA), in collaboration with the New York State Department of Public Service (DPS), conducted a statewide residential baseline study (study) from 2011 to 2014 of the single-family and multifamily residential housing segments, including new construction, and a broad range of energy uses and efficiency measures. This dataset includes data from 219 completed Multifamily owner and manager surveys. The types of data collected during the survey cover property characteristics, heating and cooling equipment, water heating equipment, tenant appliances, lighting, purchasing decision, common areas, clothes washing and drying, and miscellaneous equipment. The data is segmented to cover both common space equipment and, to the degree possible, tenant-unit equipment, such as refrigerators or clothes washers that are included in the rental by the building ownership.

This dataset provides a listing, including location and site informtion for all New York State offices with Department of Environmental Conservation (DEC) staff.

How does your organization use this dataset? What other NYSERDA or energy-related datasets would you like to see on Open NY? Let us know by emailing OpenNY@nyserda.ny.gov.

The New York State Energy Research and Development Authority (NYSERDA), in collaboration with the New York State Department of Public Service (DPS), conducted a statewide residential baseline study (study) from 2011 to 2014 of the single-family and multifamily residential housing segments, including new construction, and a broad range of energy uses and efficiency measures. This dataset includes 2,982 single-family and 379 multifamily occupant survey completes for a total of 3,361 responses. The survey involved 2,285 Web, 1,041 telephone, and 35 mini-inspection surveys. The survey collected information on the following building characteristics: building shell, kitchen appliances, heating and cooling equipment, water heating equipment, clothes washing and drying equipment, lighting, pool and spa equipment, small household appliances, miscellaneous energy consuming equipment, as well as behaviors and characteristics of respondents.

New York State Department of Environmental Conservation (NYS DEC) issues permits to facilities to rear or sell selected fish species. This dataset is a list of New York facilities with permits to rear or sell selected fish species is compiled annually and updated periodically by DEC, and is distributed for information only. It is compiled to help people find possible sources of certified disease-free fish for stocking. Fish purchasers are reminded that DEC stocking permits are required before fish are placed into any New York State waters. Purchasers should also receive a copy of a fish health certificate indicating the fish they are buying for stocking purposes are from facilities that have been inspected and found free of the fish pathogens identified in DEC's regulations NYCRR, Title 6, Part 188.1 and 188.2. For additional information call the nearest DEC Regional Office.

How does your organization use this dataset? What other NYSERDA or energy-related datasets would you like to see on Open NY? Let us know by emailing OpenNY@nyserda.ny.gov.

The New York State Energy Research and Development Authority (NYSERDA), in collaboration with the New York State Department of Public Service (DPS), conducted a statewide residential baseline study (study) from 2011 to 2014 of the single-family and multifamily residential housing segments, including new construction, and a broad range of energy uses and efficiency measures. This dataset includes data collected from a total of 67 on-site inspections of multifamily buildings. Data collected during the inspections covers property characteristics, heating and cooling equipment, water heating equipment, appliances, lighting, clothes washing and drying, miscellaneous energy using equipment, and observable operating behavior. The objective of the on-site inspections was to enhance the residential baseline study with detailed on-site information and, to the degree possible, verify self-reported data from the phone and web surveys. The on-site inspection data is segmented to cover both common space equipment and tenant-unit equipment.

Owners or operators of emission sources that are subject to 6 NYCRR Subpart 201-6 must obtain a Title V facility permit.

Draft permits are official versions of permits whose initial development is complete, and that are being noticed and made available for public review and comment.

These permits are prepared by the Division of Air Resources regional staff.

IMPORTANT! PLEASE READ DISCLAIMER BEFORE USING DATA. The Residential Existing Homes Program is a market transformation program that uses Building Performance Institute (BPI) Goldstar contractors to install comprehensive energy-efficient improvements.  The program is designed to use building science and a whole-house approach to reduce energy use in the State’s existing one-to-four family and low-rise multifamily residential buildings and capture heating fuel and electricity-related savings.  The Program provides income-based incentives, including an assisted subsidy for households with income up to 80% of the State or Median County Income, whichever is higher to install eligible energy efficiency improvements including building shell measures, high efficiency heating and cooling measures, ENERGY STAR appliances and lighting.
 
D I S C L A I M E R: Estimated Annual kWh Savings, Estimated Annual MMBtu Savings, and First Year Energy Savings $ Estimate represent contractor reported savings derived from energy modeling software calculations and not actual realized energy savings. The accuracy of the Estimated Annual kWh Savings and Estimated Annual MMBtu Savings for projects has been evaluated by an independent third party. The results of the impact analysis indicate that, on average, actual savings amount to 35 percent of the Estimated Annual kWh Savings and 65 percent of the Estimated Annual MMBtu Savings. The analysis did not evaluate every single project, but rather a sample of projects from 2007 and 2008, so the results are applicable to the population on average but not necessarily to any individual project which could have over or under achieved in comparison to the evaluated savings. The results from the impact analysis will be updated when more recent information is available. Many factors influence the degree to which estimated savings are realized, including proper calibration of the savings model and the savings algorithms used in the modeling software. Some reasons individual households may realize savings different from those projected include, but are not limited to, changes in the number or needs of household members, changes in occupancy schedules, changes in energy usage behaviors, changes to appliances and electronics installed in the home, and beginning or ending a home business. Beginning November 2017, the Program requires the use of HPXML-compliant modeling software tools and data quality protocols have been implemented to more accurately project savings. For more information, please refer to the Evaluation Report published on NYSERDA’s website at:  http://www.nyserda.ny.gov/-/media/Files/Publications/PPSER/Program-Evaluation/2012ContractorReports/2012-HPwES-Impact-Report-with-Appendices.pdf.
 
The New York Residential Existing Homes (One to Four Units) dataset includes the following data points for projects completed during Green Jobs Green-NY, beginning November 15, 2010: Home Performance Project ID, Home Performance Site ID, Project County, Project City, Project Zip, Gas Utility, Electric Utility, Project Completion Date, Customer Type, Low-Rise or Home Performance Indicator, Total Project Cost (USD), Total Incentives (USD), Type of Program Financing, Amount Financed Through Program (USD), Pre-Retrofit Home Heating Fuel Type, Year Home Built, Size of Home, Volume of Home, Number of Units, Measure Type, Estimated Annual kWh Savings, Estimated Annual MMBtu Savings, First Year Energy Savings $ Estimate (USD), Homeowner Received Green Jobs-Green NY Free/Reduced Cost Audit (Y/N).

How does your organization use this dataset? What other NYSERDA or energy-related datasets would you like to see on Open NY? Let us know by emailing OpenNY@nyserda.ny.gov.

How does your organization use this dataset? What other NYSERDA or energy-related datasets would you like to see on Open NY? Let us know by emailing OpenNY@nyserda.ny.gov.

The New York State Energy Research and Development Authority (NYSERDA), in collaboration with the New York State Department of Public Service (DPS), conducted a statewide residential baseline study (study) from 2011 to 2014 of the single-family and multifamily residential housing segments, including new construction, and a broad range of energy uses and efficiency measures. This dataset includes 2,982 single-family and 379 multifamily occupant survey completes for a total of 3,361 responses. The survey involved 2,285 Web, 1,041 telephone, and 35 mini-inspection surveys. The survey collected information on the following building characteristics: building shell, kitchen appliances, heating and cooling equipment, water heating equipment, clothes washing and drying equipment, lighting, pool and spa equipment, small household appliances, miscellaneous energy consuming equipment, as well as behaviors and characteristics of respondents.

The Division of Water Stream Biomonitoring Unit (SBU) dataset contains the point sampling locations at which benthic macroinvertebrates, field chemistry, and at some locations, sediment, fish or diatoms have been collected as part of the Rotating Integrated Basin Studies (RIBS) program, Rapid Biological Assessments (RAS), or special studies. The data collected are used for water quality assessment (input to the Waterbody Inventory, completion of the 305(b) report and 303(d) list of impaired Waters) and for track-down of water quality problems. The data set is maintained by the Division of Water, Bureau of Water Assessment and Management, Stream Biomonitoring Unit.

IMPORTANT! PLEASE READ DISCLAIMER BEFORE USING DATA. To reduce the energy burden on income-qualified households within New York State, NYSERDA offers the EmPower New York (EmPower) program, a retrofit program that provides cost-effective electric reduction measures (i.e., primarily lighting and refrigerator replacements), and cost-effective home performance measures (i.e., insulation air sealing, heating system repair and replacments, and health and safety measures) to income qualified homeowners and renters. Home assessments and implementation services are provided by Building Performance Institute (BPI) Goldstar contractors to reduce energy use for low income households. This data set includes energy efficiency projects completed since January 2018 for households with income up to 60% area (county) median income.

D I S C L A I M E R: Estimated Annual kWh Savings, Estimated Annual MMBtu Savings, and First Year Energy Savings $ Estimate represent contractor reported savings derived from energy modeling software calculations and not actual realized energy savings. The accuracy of the Estimated Annual kWh Savings and Estimated Annual MMBtu Savings for projects has been evaluated by an independent third party. The results of the impact analysis indicate that, on average, actual savings amount to 54 percent of the Estimated Annual kWh Savings and 70 percent of the Estimated Annual MMBtu Savings. The analysis did not evaluate every single project, but rather a sample of projects from 2007 and 2008, so the results are applicable to the population on average but not necessarily to any individual project which could have over or under achieved in comparison to the evaluated savings. The results from the impact analysis will be updated when more recent information is available. Some reasons individual households may realize savings different from those projected include, but are not limited to, changes in the number or needs of household members, changes in occupancy schedules, changes in energy usage behaviors, changes to appliances and electronics installed in the home, and beginning or ending a home business. For more information, please refer to the Evaluation Report published on NYSERDA’s website at: https://www.nyserda.ny.gov/-/media/Files/Publications/PPSER/Program-Evaluation/2012ContractorReports/2012-EmPower-New-York-Impact-Report.pdf.

This dataset includes the following data points for projects completed after January 1, 2018: Reporting Period, Project ID, Project County, Project City, Project ZIP, Gas Utility, Electric Utility, Project Completion Date, Total Project Cost (USD), Pre-Retrofit Home Heating Fuel Type, Year Home Built, Size of Home, Number of Units, Job Type, Type of Dwelling, Measure Type, Estimated Annual kWh Savings, Estimated Annual MMBtu Savings, First Year Modeled Energy Savings $ Estimate (USD).

How does your organization use this dataset? What other NYSERDA or energy-related datasets would you like to see on Open NY? Let us know by emailing OpenNY@nyserda.ny.gov.

The docket management system is a database of cases that have been referred to OHMS for public hearings or other action by an administrative law judge and a decision by the Commissioner of the New York State Department of Environmental Conservation. The docket contains cases that were open on or after January 1, 2005.

Land acquisition projects completed by DEC reported since the institution of the required Annual Land Acquisition Report in ECL § 49-0213.

How does your organization use this dataset? What other NYSERDA or energy-related datasets would you like to see on Open NY? Let us know by emailing OpenNY@nyserda.ny.gov.

This is part 2 of 2 (containing: Purchasing Decisions; Washer and Dryer; and Miscellaneous); part 1 (https://data.ny.gov/d/e58s-chjh) contains: Property Characteristics; Heating and Cooling; Water Heating; Tenant Appliances; Lighting; and Common Area. The New York State Energy Research and Development Authority (NYSERDA), in collaboration with the New York State Department of Public Service (DPS), conducted a statewide residential baseline study (study) from 2011 to 2014 of the single-family and multifamily residential housing segments, including new construction, and a broad range of energy uses and efficiency measures. This dataset includes data from 219 completed Multifamily owner and manager surveys. The types of data collected during the survey cover property characteristics, heating and cooling equipment, water heating equipment, tenant appliances, lighting, purchasing decision, common areas, clothes washing and drying, and miscellaneous equipment. The data is segmented to cover both common space equipment and, to the degree possible, tenant-unit equipment, such as refrigerators or clothes washers that are included in the rental by the building ownership.

How does your organization use this dataset? What other NYSERDA or energy-related datasets would you like to see on Open NY? Let us know by emailing OpenNY@nyserda.ny.gov.

This is part 1 (containing: Property Characteristics; Heating and Cooling; Water Heating; Tenant Appliances; Lighting; and Common Areas) of 2; part 2 (https://data.ny.gov/d/hc4z-b2p5) contains: Purchasing Decisions; Washer and Dryer; and Miscellaneous. The New York State Energy Research and Development Authority (NYSERDA), in collaboration with the New York State Department of Public Service (DPS), conducted a statewide residential baseline study (study) from 2011 to 2014 of the single-family and multifamily residential housing segments, including new construction, and a broad range of energy uses and efficiency measures. This dataset includes data from 219 completed Multifamily owner and manager surveys. The types of data collected during the survey cover property characteristics, heating and cooling equipment, water heating equipment, tenant appliances, lighting, purchasing decision, common areas, clothes washing and drying, and miscellaneous equipment. The data is segmented to cover both common space equipment and, to the degree possible, tenant-unit equipment, such as refrigerators or clothes washers that are included in the rental by the building ownership.

How does your organization use this dataset? What other NYSERDA or energy-related datasets would you like to see on Open NY? Let us know by emailing OpenNY@nyserda.ny.gov.

This is part 1 (containing: Property Characteristics; Heating and Cooling; Water Heating; Tenant Appliances; Lighting; and Common Areas) of 2; part 2 (https://data.ny.gov/d/hc4z-b2p5) contains: Purchasing Decisions; Washer and Dryer; and Miscellaneous. The New York State Energy Research and Development Authority (NYSERDA), in collaboration with the New York State Department of Public Service (DPS), conducted a statewide residential baseline study (study) from 2011 to 2014 of the single-family and multifamily residential housing segments, including new construction, and a broad range of energy uses and efficiency measures. This dataset includes data from 219 completed Multifamily owner and manager surveys. The types of data collected during the survey cover property characteristics, heating and cooling equipment, water heating equipment, tenant appliances, lighting, purchasing decision, common areas, clothes washing and drying, and miscellaneous equipment. The data is segmented to cover both common space equipment and, to the degree possible, tenant-unit equipment, such as refrigerators or clothes washers that are included in the rental by the building ownership.

How does your organization use this dataset? What other NYSERDA or energy-related datasets would you like to see on Open NY? Let us know by emailing OpenNY@nyserda.ny.gov.

The Multifamily Performance Program (MPP) serves residential buildings with five or more units. Funds are targeted at energy efficiency measures that help to reduce on-site electricity, oil, natural gas, steam, and propane energy demand and energy consumption in multi-unit residential buildings. All buildings receive program support for energy assessments to identify and determine cost-effective measures, expected energy savings, and installation costs. Our dataset is then compiled from the information. The dataset includes information collected throughout the project application process and energy assessments from several NYSERDA-funded programs, including Multifamily Performance Program-Existing Buildings, Multifamily Performance Program-New Construction, and Multifamily Performance Program-Energy Star Pilot.
The Multifamily Residential Existing and New Construction Energy Efficiency Projects Reported by NYSERDA: Beginning 2005 dataset includes the following data points for completed projects: Project Name, Program Type, Building Address1, Building City, Building ZIP, Property County, Electric Utility, Gas Utility, Market Type, Number of Buildings, Number of Units, Application NYSERDA Approved Date, Project Completed Date, Funding Amount, Proposed Install Unit Cost, Total Estimated Electric Savings, Total Estimated Annual Energy Savings, and Total Estimated Electric Demand Reduction (MW). Information about the Projects’ measures, measure category, and estimated energy savings by fuel type can be found in the Multifamily Residential Existing and New Construction Energy Efficiency Measures Reported by NYSERDA: Beginning 2005 dataset.
Reported savings account for interactive effects between measures.

How does your organization use this dataset? What other NYSERDA or energy-related datasets would you like to see on Open NY? Let us know by emailing OpenNY@nyserda.ny.gov.

The New York State Energy Research and Development Authority (NYSERDA), in collaboration with the New York State Department of Public Service (DPS), conducted a statewide residential baseline study (study) from 2011 to 2014 of the single-family and multifamily residential housing segments, including new construction, and a broad range of energy uses and efficiency measures.The study includes 3 separate study sections:1. HVAC: This dataset includes data from 47 completed Heating Ventilation and Air Conditioning (HVAC) contractor surveys. The survey sample was stratified by the size of the HVAC contractor company: 28 survey completes for small companies (defined as having 1-10 employees) and 19 survey completes for large companies (defined as larger than 10 employees.) The surveys focused on employer or company information, sales of energy efficient HVAC equipment, installation practices, training, and experience with NYS energy efficiency programs.2. Multifamily Owner/Manager (MOM): This dataset includes data from 219 completed Multifamily owner and manager surveys. The types of data collected during the survey cover property characteristics, heating and cooling equipment, water heating equipment, tenant appliances, lighting, purchasing decision, common areas, clothes washing and drying, and miscellaneous equipment. The data is segmented to cover both common space equipment and, to the degree possible, tenant-unit equipment, such as refrigerators or clothes washers that are included in the rental by the building ownership.3. Single/Multifamily Occupant (SMO): This dataset includes 2,982 single-family and 379 multifamily occupant survey completes for a total of 3,361 responses. The survey involved 2,285 Web, 1,041 telephone, and 35 mini-inspection surveys. The survey collected information on the following building characteristics: building shell, kitchen appliances, heating and cooling equipment, water heating equipment, clothes washing and drying equipment, lighting, pool and spa equipment, small household appliances, miscellaneous energy consuming equipment, as well as behaviors and characteristics of respondents.

This quantitative set of numeric values represents the total reportable activity as collected from the sworn Members of the Division of Law Enforcement from each of the 9 regions across New York State.