Industrial Development Agencies (IDA) are required by section 859 of General Municipal Law to submit annual financial statements and are required by Section 2800 of Public Authorities Law to submit annual reports to the Authorities Budget Office. The reported information includes financial assistance provided by the IDA and job creation/retention for each project receiving assistance. The dataset includes project data as reported by each IDA that covers 8 fiscal years, which includes fiscal years ending in the most recently completed calendar year.

IMPORTANT! PLEASE READ DISCLAIMER BEFORE USING DATA. To reduce the energy burden on income-qualified households within New York State, NYSERDA offers the EmPower New York (EmPower) program, a retrofit program that provides cost-effective electric reduction measures (i.e., primarily lighting and refrigerator replacements), and cost-effective home performance measures (i.e., insulation air sealing, heating system repair and replacments, and health and safety measures) to income qualified homeowners and renters. Home assessments and implementation services are provided by Building Performance Institute (BPI) Goldstar contractors to reduce energy use for low income households. This data set includes energy efficiency projects completed since January 2018 for households with income up to 60% area (county) median income.

D I S C L A I M E R: Estimated Annual kWh Savings, Estimated Annual MMBtu Savings, and First Year Energy Savings $ Estimate represent contractor reported savings derived from energy modeling software calculations and not actual realized energy savings. The accuracy of the Estimated Annual kWh Savings and Estimated Annual MMBtu Savings for projects has been evaluated by an independent third party. The results of the impact analysis indicate that, on average, actual savings amount to 54 percent of the Estimated Annual kWh Savings and 70 percent of the Estimated Annual MMBtu Savings. The analysis did not evaluate every single project, but rather a sample of projects from 2007 and 2008, so the results are applicable to the population on average but not necessarily to any individual project which could have over or under achieved in comparison to the evaluated savings. The results from the impact analysis will be updated when more recent information is available. Some reasons individual households may realize savings different from those projected include, but are not limited to, changes in the number or needs of household members, changes in occupancy schedules, changes in energy usage behaviors, changes to appliances and electronics installed in the home, and beginning or ending a home business. For more information, please refer to the Evaluation Report published on NYSERDA’s website at: https://www.nyserda.ny.gov/-/media/Files/Publications/PPSER/Program-Evaluation/2012ContractorReports/2012-EmPower-New-York-Impact-Report.pdf.

This dataset includes the following data points for projects completed after January 1, 2018: Reporting Period, Project ID, Project County, Project City, Project ZIP, Gas Utility, Electric Utility, Project Completion Date, Total Project Cost (USD), Pre-Retrofit Home Heating Fuel Type, Year Home Built, Size of Home, Number of Units, Job Type, Type of Dwelling, Measure Type, Estimated Annual kWh Savings, Estimated Annual MMBtu Savings, First Year Modeled Energy Savings $ Estimate (USD).

How does your organization use this dataset? What other NYSERDA or energy-related datasets would you like to see on Open NY? Let us know by emailing OpenNY@nyserda.ny.gov.

IMPORTANT! PLEASE READ DISCLAIMER BEFORE USING DATA. The Residential Existing Homes Program is a market transformation program that uses Building Performance Institute (BPI) Goldstar contractors to install comprehensive energy-efficient improvements.  The program is designed to use building science and a whole-house approach to reduce energy use in the State’s existing one-to-four family and low-rise multifamily residential buildings and capture heating fuel and electricity-related savings.  The Program provides income-based incentives, including an assisted subsidy for households with income up to 80% of the State or Median County Income, whichever is higher to install eligible energy efficiency improvements including building shell measures, high efficiency heating and cooling measures, ENERGY STAR appliances and lighting.
 
D I S C L A I M E R: Estimated Annual kWh Savings, Estimated Annual MMBtu Savings, and First Year Energy Savings $ Estimate represent contractor reported savings derived from energy modeling software calculations and not actual realized energy savings. The accuracy of the Estimated Annual kWh Savings and Estimated Annual MMBtu Savings for projects has been evaluated by an independent third party. The results of the impact analysis indicate that, on average, actual savings amount to 35 percent of the Estimated Annual kWh Savings and 65 percent of the Estimated Annual MMBtu Savings. The analysis did not evaluate every single project, but rather a sample of projects from 2007 and 2008, so the results are applicable to the population on average but not necessarily to any individual project which could have over or under achieved in comparison to the evaluated savings. The results from the impact analysis will be updated when more recent information is available. Many factors influence the degree to which estimated savings are realized, including proper calibration of the savings model and the savings algorithms used in the modeling software. Some reasons individual households may realize savings different from those projected include, but are not limited to, changes in the number or needs of household members, changes in occupancy schedules, changes in energy usage behaviors, changes to appliances and electronics installed in the home, and beginning or ending a home business. Beginning November 2017, the Program requires the use of HPXML-compliant modeling software tools and data quality protocols have been implemented to more accurately project savings. For more information, please refer to the Evaluation Report published on NYSERDA’s website at:  http://www.nyserda.ny.gov/-/media/Files/Publications/PPSER/Program-Evaluation/2012ContractorReports/2012-HPwES-Impact-Report-with-Appendices.pdf.
 
The New York Residential Existing Homes (One to Four Units) dataset includes the following data points for projects completed during Green Jobs Green-NY, beginning November 15, 2010: Home Performance Project ID, Home Performance Site ID, Project County, Project City, Project Zip, Gas Utility, Electric Utility, Project Completion Date, Customer Type, Low-Rise or Home Performance Indicator, Total Project Cost (USD), Total Incentives (USD), Type of Program Financing, Amount Financed Through Program (USD), Pre-Retrofit Home Heating Fuel Type, Year Home Built, Size of Home, Volume of Home, Number of Units, Measure Type, Estimated Annual kWh Savings, Estimated Annual MMBtu Savings, First Year Energy Savings $ Estimate (USD), Homeowner Received Green Jobs-Green NY Free/Reduced Cost Audit (Y/N).

How does your organization use this dataset? What other NYSERDA or energy-related datasets would you like to see on Open NY? Let us know by emailing OpenNY@nyserda.ny.gov.

IMPORTANT! PLEASE READ DISCLAIMER BEFORE USING DATA. The Residential Existing Homes Program is a market transformation program that uses Building Performance Institute (BPI) Goldstar contractors to install comprehensive energy-efficient improvements.  The program is designed to use building science and a whole-house approach to reduce energy use in the State’s existing one-to-four family and low-rise multifamily residential buildings and capture heating fuel and electricity-related savings.  The Program provides income-based incentives, including an assisted subsidy for households with income up to 80% of the State or Median County Income, whichever is higher to install eligible energy efficiency improvements including building shell measures, high efficiency heating and cooling measures, ENERGY STAR appliances and lighting.
 
D I S C L A I M E R: Estimated Annual kWh Savings, Estimated Annual MMBtu Savings, and First Year Energy Savings $ Estimate represent contractor reported savings derived from energy modeling software calculations and not actual realized energy savings. The accuracy of the Estimated Annual kWh Savings and Estimated Annual MMBtu Savings for projects has been evaluated by an independent third party. The results of the impact analysis indicate that, on average, actual savings amount to 35 percent of the Estimated Annual kWh Savings and 65 percent of the Estimated Annual MMBtu Savings. The analysis did not evaluate every single project, but rather a sample of projects from 2007 and 2008, so the results are applicable to the population on average but not necessarily to any individual project which could have over or under achieved in comparison to the evaluated savings. The results from the impact analysis will be updated when more recent information is available. Many factors influence the degree to which estimated savings are realized, including proper calibration of the savings model and the savings algorithms used in the modeling software. Some reasons individual households may realize savings different from those projected include, but are not limited to, changes in the number or needs of household members, changes in occupancy schedules, changes in energy usage behaviors, changes to appliances and electronics installed in the home, and beginning or ending a home business. Beginning November 2017, the Program requires the use of HPXML-compliant modeling software tools and data quality protocols have been implemented to more accurately project savings. For more information, please refer to the Evaluation Report published on NYSERDA’s website at:  http://www.nyserda.ny.gov/-/media/Files/Publications/PPSER/Program-Evaluation/2012ContractorReports/2012-HPwES-Impact-Report-with-Appendices.pdf.
 
The New York Residential Existing Homes (One to Four Units) dataset includes the following data points for projects completed during Green Jobs Green-NY, beginning November 15, 2010: Home Performance Project ID, Home Performance Site ID, Project County, Project City, Project Zip, Gas Utility, Electric Utility, Project Completion Date, Customer Type, Low-Rise or Home Performance Indicator, Total Project Cost (USD), Total Incentives (USD), Type of Program Financing, Amount Financed Through Program (USD), Pre-Retrofit Home Heating Fuel Type, Year Home Built, Size of Home, Volume of Home, Number of Units, Measure Type, Estimated Annual kWh Savings, Estimated Annual MMBtu Savings, First Year Energy Savings $ Estimate (USD), Homeowner Received Green Jobs-Green NY Free/Reduced Cost Audit (Y/N).

How does your organization use this dataset? What other NYSERDA or energy-related datasets would you like to see on Open NY? Let us know by emailing OpenNY@nyserda.ny.gov.